QGA 6000(5 Gas Analyzer)

Array
A modern Gas Analyzer (QGA-6000) designed for the strict requirements of emissions of nowadays. It is equipped with functions of measurement for four(4) gases (CO, HC, CO2 and 02) and...
Ask a question about this product

{tab Description}

A modern Gas Analyzer (QGA-6000) designed for the strict requirements of emissions of nowadays. It is equipped with functions of measurement for four(4) gases (CO, HC, CO2 and 02) and provides the calculations of lambda and air/combustible AFR. The screen is equipped with six(6) luminous elements and the results can be printed by the built-in printer.

Product Characteristics

  • Excellent precision, stability and durability
  • Expandable up to five gases (NOx option)
  • Response time of less than 10 seconds
  • Stand-by to prolong the life of pump and low power consumption
  • Automatic tuning of the warm up time - 2~8 minutes
  • RS232 PC-Link kit (software and cables)
  • Elegant Aspect - portable (so large compact, slight weight)
  • Provided Kit of consumable of series
  • System of filtration of 5 stages for protection of bank
  • Compatible with the applications of Dyno
  • Function of control of leakage to verify the hose and the integrity of the sounding
  • Function of blockade as pause of measurement
  • Official software Tests of Emission
  • Test of residus of HC - fuel Selection. Gasoline, GLP, GNC and Alcohol
  • Stainless steel Sounding for a greater duration
  • Printing incorporated

{tab Spec}

Target Subject CO, HC, CO2, O2, λ (Excess Air Ratio), AFR, NOx (optional)
Sensor Theory CO, HC, CO2 : Non-Dispersive Infrared Analysis (NDIR)
O2, Nox : Electrochemical Cell
Analysis Range

CO:
0.00 ~ 9.99%
0.01%
4 digit 7 segment LED

HC:
0 ~ 15,000 ppm
1 ppm
4 digit 7segment LED
Resolving Power
Display
Analysis Range

CO2:
0.0 ~ 20.0%
0.10%
4 digit 7segment LED

O2:
0.00 ~ 25.00 %
0.01%
4 digit 7segment LED
Resolving Power
Display
Analysis Range

λ:
0 ~ 2.000
0.001
4 digit 7segment LED

AFR:
0.0 ~ 99.0
0.1
4 digit 7segment LED
Resolving Power
Display
Repetition Rate  Lower than ±2% FS 
Response Time  Within 10 seconds (90% of the time) 
Preheat Time  Approx. 2~8 minutes 
Sample Requirement  4 ~ 6 L/min 
Voltage Use  AC110V or AC220V ±10%, 50/60Hz 
Power Consumption  Approx. 50W 
Category Temperature  0℃ ~ 40℃ 
Size  420 (W) * 298 (D) * 180 (H) mm 
Weight  Approx. 6.9kg 
Included Accessories  Probe, Probe Hose, Emergency Fuse, Water Leak Testing Cap,Emergency Filter, Instruction Manual, Power Cord, Ground Wire, andType Approval Certificate 

{/tabs}

Back to: Hand Tools